How to make a beautiful paper star. A paper star is easy! How to make a paper star

For interior decoration or themed holidays, such a decorative element as a star is often used. There are a lot of variations on the theme of making a star: large and small, voluminous and flat, double or single. Materials for making crafts also vary significantly. It can be paper, cloth, foil, wire and other improvised means. In this article, we will consider the most popular formats for making paper stars. Well, a selection of thematic photos, detailed diagrams and video material of a master class on making a star with your own hands will make the task easier.

How to make a small paper star

Such stars are small (1.5 cm), but in large numbers they look very impressive and original.

To work, you will need colored or glossy paper (you can also use old glossy magazines) and scissors.

• First, blanks are made: paper strips are cut, 29x1.1 cm in size. The width and length of the strips can be changed according to the desired size of the future star.
• Make a small loop from the strip (at the edge), then bend the protruding short end. It turns out a pentagonal figure, press it slightly.
• Turn the product over (pentagon) and continue working with the long end of the strip.
• With a strip, we begin to tightly, gradually wrap the pentagonal figure, without pinching it too much. At least 10 such wraps are obtained, that is, each face of the star is wrapped twice.

• Hide the remaining edge of the strip under the bottom.
• The next stage: the transformation of the pentagon into a full-fledged star. Holding the workpiece with one hand, with the nail of the other hand, press on the middle of the face of the pentagon, forming the rays of an asterisk. Five pressures - and the star is ready!

• Such stars look very stylish in the interior: they can fill a glass vase or a jar. And if you do this business with the children, the motor skills of the fingers are perfectly trained.

How to make a paper star

To make such three-dimensional stars, you will need thick decorative paper, scissors and glue.

• Draw blanks for the rays of the star, print and transfer to the desired paper.
• Bend along the lines and glue along the edge (gluing allowances are given).
• Then, glue the five prepared templates together, getting a three-dimensional star.

• The size of the stars can be adjusted independently by increasing or decreasing the size of the template.

How to make an origami paper star

Such stars look great and stylish from newsprint or music paper.

• Fold a square-shaped sheet in half, then bend the triangle of one of the vertices.
• Do the same maneuver with the other vertex of the rectangle.
• Attach the opposite corner of the rectangle to the intersection point of the previous folds.

• Next, bend the rays of the future star along the drawn lines. The remaining shapeless tail of the workpiece is cut off.
• With the correct execution of all the folds, on the spread you can see the pentagon pattern.

• The final stage is the most difficult. To get a star, you need to carefully bend and wrap the resulting template along the lines.

So, in this article, the most popular ways of making a paper star were considered. Completely different in appearance and manufacturing method, the presented options will ideally fit into the festive interior and become a spectacular decoration.

As a rule, the older a person becomes, the more nostalgically he begins to remember his childhood years. For many adults today, this time is permeated with Soviet symbols, among which red stars can be noted.

In this master class, I will show several options for how to make a paper star with your own hands with step by step photos. Such a five-pointed symbol may be relevant now. For example, a red star is perfect as a decoration for a New Year's interior. It is not difficult to make it out of paper, focusing on the proposed master classes.

01. Do-it-yourself voluminous paper star

To create a three-dimensional star, we need to prepare:

• red paper;
• scissors;
• pencil;
• ruler;
• PVA glue.

First, cut out 5 squares of the same size from red paper.

Our blanks have a side of 9 cm.

After that, you can begin to add each square. First, make a diagonal fold.

Then we unfold the square blank. Bend the right side to the middle.

A similar fold must be done on the left side.

Now we need to make folds in the upper part of our workpiece. First we fold the right side.

After that, we make a fold on the left side. Our workpiece has acquired the shape of a rhombus.

Fold it in half.

The top layer needs to be bent to the side.

In this case, it is worth paying attention to the fact that on the reverse side the top of the triangle coincides with the fold line.

Slightly unfold the workpiece.

Smooth out the fold lines.

Now we begin to straighten one of the rays of the future star.

Gently straighten its inner layer.

Now we give the workpiece the following form. We have an element consisting of one whole beam and a half.

We need to make 4 more such blanks.

You can start assembling the star, and this will require glue. We apply it to one half of the beam.

After that, we insert one element into another.

So we connected 2 modules.

We glue the remaining elements in a similar way. Our volumetric paper star is ready.

02. How to make a star using the modular origami technique

The modular origami technique allows you to create three-dimensional figures using the same elements. Our master class presents the phased production of a star from several modules.

To work, you need 10 square sheets of paper. We took sheets of paper in red.

We start by making one module. For him, we need two sheets. First, we bend them along two diagonals. Now these same sheets of paper should be bent in transverse directions, but in the other direction.

From one we fold the workpiece in the form of a double square.

From another sheet of paper with pre-planned folds, we fold the blank in the form of a double triangle.

Now insert the triangle inside the square.

We bend the protruding tips from the square inward. First, we do this from two opposite sides.

Then we unfold the module blank and bend the protruding corners again. So we got one of the modules.

We need to make 4 more such modules for the future star. Let's start connecting the modules. They will be attached to each other due to the corners protruding on the sides.

Two corners of one workpiece should be inserted under the folds of the other from the inside.

We introduce the corners of another module from the outside under the folds of the neighboring one.

So we continue to connect the individual modules.

We close all 5 elements in a ring.

You can leave the origami star in this form, or you can slightly raise its upper part.

03. Volumetric star made of paper for a postcard

On a white sheet, draw a star stencil, as in the photo, and prepare a sheet of red cardboard.

Cut it out.

Bend the workpiece - all short strips are bent inward, and long ones are bent outward. Glue it to the base. In this way, you can make a three-dimensional star for a postcard for February 23 or May 9.

How to make a five-pointed star out of paper video tutorial

Good afternoon, today I am publishing an article in which I have collected a variety of ways to make New Year's stars with my own hands. We will make stars paper, cardboard, sew stars from felt, crochet them. You will see simple christmas crafts accessible to children, and complex structures in the shape of a star.

Here are some of the ideas I gathered today in one common pile:

• Stars from strips of paper using quilling technique.
• The stars are transparent with stained glass film.
• Stars are three-dimensional in 3d technique.
• Christmas star window stickers.
• Christmas garlands with stars.
• Six-pointed stars with convex edges.
• Stars from cardboard modules.
• New Year's stars from the newspaper.

So, let's start our New Year's star crafts.

Craft Idea #1

paper star

in the quilling technique.

Here is the first idea - a New Year's star from strips of paper, twisted and glued in quilling technique.

Even if you are not yet familiar with the paper strip twisting technique, you just need to take a close look in the photo below to understand how this paper star is made.

First, from paper strips, we collect separately five rays– and then glue them together.

Here in the photo below, I even highlighted each detail of the paper strips separately - in different colors.

Each ray of a star is made up of three short oval twists of paper strips - light green lines. One twist is longer - orange line. And one paper tape , which wraps all these twists together - in the form of a single frame - the pink line in the photo below.

You yourself will rejoice at how quickly your homemade New Year's star made of paper turned out. You can make several of these and hang them on the Christmas tree as a decoration.

And according to a very similar principle, we can create such stars. This is also essentially QUILLING. But here the forms are no longer so smooth and rounded, but more clear and faceted. But the principle is the same.

If you look closely at the photo below, you will see that each of the rays of the star is 2 triangles glued together its longest of three sides.

That is, cutting 10 identical strips of paper. From each we make a paper triangle. All ten triangles are divided into pairs. And we glue each pair with each other with a long side. We get five rays future paper star. We glue the rays together. Close the center of the gluing with an asterisk. With a hole punch we make a hole in the upper beam in order to hang it on a Christmas tree by a thread.

Craft Idea #2

new year star

FROM ROLLS from toilet paper

And here is the next DIY star idea similar to the previous technique the fact that here, too, round paper loops are glued together. Only the loops here are not glued from paper strips, but are toilet paper roll cuts- and a transparent colored film (food wrap, or colored tape) is stretched over each section.

.

We need a roll of paper towels or toilet paper. And we will also need multi-colored transparent pieces of film to wrap around our paper blanks for the star.

Where can I get transparent color film for this Christmas star craft.

Option 1 - food color polyethylene.

Option 2 - colored transparent candy wrappers.

Option 3 - colored transparent packaging from bouquets, or gift wrapping in stores with a gift wrapping department.

Option 4 - colored wide adhesive tape - is sold in hardware or finishing stores.

Option 5 - a transparent finishing film from a hardware store. It is sold in such large rolls as wallpaper - but they can be bought in any pieces - at least 1 meter, at least 10 cm - cut off from the roll and sold. But first you need to make sure that this film, in isolation from the paper base, gives a transparent color - that is, it transmits light. Check directly in the store - peel off the corner of the film from the paper base directly on the roll and check it for transparency.

How we will make New Year's transparent stars.

We cut the paper roll into identical parts-rings - and from these parts we bend ray shapes and middle-pentagon for our future star.

To fold the pentagonal middle - you need measure the circumference of the roll and divide it into 5 equal parts. And bend in the places marked with a pencil.

And now for every ray of our star we must bend BASE, which in length will coincide with the length of the side of the pentagonal center. To do this, bend the roll along the edge and measure with a ruler half the length of the side of the pentagonal center stars.

By the same principle, we wrap the remaining rays of a cardboard star in a film (or colored tape).

And now our task is to glue all parts of the asterisk into one - connect the rays with the middle.

The easiest way is with a piece of double-sided tape. Scotch tape with sticky edges on both sides.

Or you can spread it with PVA glue and dry it pressed down - we squeeze it with clothespins

And when assembled, such an asterisk is hung by the window - so that it lets in light and looks like a New Year's glass craft.

By the way.

If you have a glass cutter and multi-colored pieces of glass left over from old interior doors, then you can do real glass Christmas stars.

Craft Idea #3

new year star

in the BEER technique.

Here in the photo below we see a six-pointed star made of paper. Even a child in a circle of children's creativity can make it. You do not need to draw anything with a compass, build complex calculations. All you need is 1 square piece of paper folded like a fan. And another square of newsprint (smaller).

BUT Master Class for making such a New Year's star with your own hands looks like this. We fold the square sheet like a fan so to get six sides- that is, three folds of the fan only (as in the photo below).

Can sheet immediately measure in width and divide this figure into 6 equal parts. And mark these parts with a pencil and make bends-folds according to these marks - then we will get a fan of six identical harmonica blades.

And if you make patterned cuts in such a star (like in a snowflake), you will get a patterned New Year's star made of paper - with a beautiful openwork pattern on its rays.

That is, the fan itself (still folded) is supplemented with slots. And then we sew the middle of the fan with a bracket, fold it in half, unfold it in a circle and glue the blades of the halves that meet.

Craft Idea #4

new year star

from twisted triangles.

Here we see a seven-pointed paper star. Because of the abundance of rays, it looks more like a snowflake. But if you change the shape of the triangle to a more elongated one, you can get a design with five rays. We lay each such tube on a paper round base smeared with glue.

Craft Idea #5

paper stars

In the form of a garland.

A paper star is often used as an element of a New Year's garland. Here I propose to consider three ways to make such a star garland for the New Year.

Option number 1. Here is the easiest and fastest way to thread stars onto a string. You need a sewing machine and silhouettes of stars cut out of cardboard.

We thread the thread into the sewing machine, put a star under the foot of the machine and drive the machine line through the star. Moreover, when the line reaches the edge of the star, we do not stop the machine, but we scribble further to get a long thread twisted into a line. After a few centimeters of such an empty line-chain, we again put a star out of cardboard.

Option number 2. You can make a garland of voluminous stars according to the same principle. They are made according to the principle of krizhka - several silhouettes of a star made of paper are superimposed on each other and fastened with a common machine seam. Or you can first paperclip these multi-layered stars.

For a garland of paper stars, it is not at all necessary to buy colored paper. You can use the pages of old books or a musical staff.

Option number 3.

And you can make a garland of three-dimensional stars with smooth edges. If you make holes in such paper stars with a hole punch, then you can stretch the thread through them - and we will get a starry New Year's garland.

Here is an understandable master class that clearly shows how to make such a three-dimensional 3D cardboard star with your own hands. As we can see, with a sharp stick under the ruler, we iron the arrows of the star. And then the ironed lines will already be easily bent into the convex folds we need. And we will get a star with faceted rays.

Those lines that lead from the center to the tip of the beam are bent outward. And the lines that lead from the center to the interbeam point are bent inward.

Craft Idea #6

new year star

with smooth edges.

And below is another easy way to make a star out of paper. Here you need a template (the drawing of the star itself) and a ruler with which we will smooth out equal folds of each face of such a star.

Look at the picture and you will see that this is a simple flat six-pointed star. It was cut out of a flat sheet of paper. And then each face was bent - in sequence, we bend one face outward, and bend the next face inward.

To draw a six-pointed star on paper yourself, you can use ruler or compass. First, we measure the distance from the middle of the circle to its edge (that is, we find out the radius of the circle). And then we measure this radius around the entire circumference with a ruler or compass. Only six of these radii fit. along the entire circle. These marks will be the points of the rays of our star with six rays.

Or you can use the ready-made stencil in the picture below. You can trace it directly from your computer screen, just put a sheet of paper on a glowing screen - the star will shine through the paper - and trace the contours (or just the points of the corners) with light pencil lines. And then remove the sheet from the screen and circle everything with a bold line.

If you want to increase or decrease the size pictures on the screen, this can be done with the buttons of your computer.

Press the button with your left hand ctrl on your keyboard (it's on the bottom row on the left) - and while the button is pressed, you use your right hand spin the mouse wheel Forward to increase, back to decrease. And the size of all pictures on the screen changes increasing or decreasing.

Craft Idea #7

new year star

From paper modules.

And here is a star made of paper, which is folded by connecting individual paper modules together. How exactly to fold such a star out of paper is shown in detail in the diagram below.

Such New Year's paper stars can be made as an independent decoration for the Christmas tree. As a decorative star for the decoration of the New Year holiday. Or such paper stars can be dotted with a ring for a Christmas wreath.

Craft Idea #8

new year star

From cardboard.

Here is a simple craft volumetric Christmas star made from cardboard. Here (as you see in the photo) you need to cut out two identical silhouettes of a five-pointed star from cardboard.

Then in each make a cardboard star cut with scissors - in a straight line, leading from the lower interbeam to the upper vertex of the beam - but do not cut to the end, and stop at the central point of the star.

When we we put one slot on the slot of the second star made of cardboard- we get a cruciform connection of two strips (perpendicular to each other). As a result, it turns out 3D star.

And here is an option when 2 stars, also cut out of thick cardboard, do not sit on top of each other - but simply lie on top of each other so that the rays of the upper star are located between the rays of the lower star. If you make openwork holes-slots in such a cardboard star with a blade, then the star will look more elegant. And gold sprinkles will make such a New Year's star quite festive.

Craft Idea #9

Cardboard stars

DOUBLE-SIDED.

Method 1 - four-beam blank

You can make a star with four rays out of paper - then make the same second one, and connect them together.

Here is a detailed master class describing how to make 2 blanks with your own hands and connect them together into one star.

Method 1 - three-beam blank.

And these voluminous paper stars are also made from two modules, glued one to meet the other. Only here the module is not of four beams, but of three.

In a flat form, this module has such a triangular shape with serif-fasteners on all three sides.

We bend the module along the longitudinal line of each of the three corners of the triangle. The faceted modules are put on each other with notches-serifs. And it turns out a voluminous star with six rays.

Craft Idea #10

paper stars

In ORIGAMI technique

You can make an origami star. That is, from an ordinary square sheet of paper WITHOUT USING SCISSORS. This is what distinguishes the fashionable Japanese origami technique - the art of turning a square plane into a figure of any complexity.

Here such a star is also obtained from one square sheet of paper. But the process looks rather complicated. But as soon as you understand it, how do you understand the speed and ease with which these stars appear. And having made 4 such stars, you acquire high-speed automatism and can add the stars almost blindly.

And here is another star in the origami technique. Where a paper module is obtained from a square sheet. And from such modules-rays we fold a solid star out of paper.

Craft Idea #11

new year stars

Transparent for windows.

You can make a star out of paper to stick it on the window. Such stars look very elegant. And this is an alternative to the classic paper snowflakes that we all used to glue on windows during the Christmas holidays.

Such a New Year's star is made of paper is quite simple. A strip of paper is folded in half. Its tips are bent to give a pointed shape. We attach the resulting module to a round base sheet. Or we immediately attach it to the window - to an imaginary circle.

Depending on the shape of the folds we made to sharpen our rectangle, we will end up with different shapes of the star's rays. Thus, having shown an EXPERIMENTAL hitch, we will be able to create more and more author's New Year's stars on the window.

Craft Idea #12

new year stars

from a rolled up newspaper.

And here is another star made of paper - or rather, from a sheet of newspaper. Here a thin twist is made from a spread of the newspaper. It is possible to place copper wire inside the newspaper twist - this way additional rigidity will be given to the bent frame of the star.

After that, the star blank from the newspaper can be decorated. Paint with paint, wrap with threads, coat with glue and cover with sparkles. Or something else according to your imagination.

These are the ideas I have collected for you in this article. Now you know a lot of ways to make a star out of paper with your mind and with your own hands.

Olga Klishevskaya, especially for the site ""
If you like our site, you can support the enthusiasm of those who work for you.
Happy New Year to the author of this article, Olga Klishevskaya.

Volume star from a thin strip of paper. Master Class

Can you imagine that a three-dimensional star can be made from a thin strip of paper?

I, like many users, answered this question in the negative, but that was only until I tried to make the original origami star myself. I want to say right away that the process of making this craft is so exciting that it can make you forget about everything in the world. It's good that there is still time before the New Year and everyone who is interested in this master class can show their abilities in creating a three-dimensional origami star.

So, let's start our master class.

Before proceeding directly to the process, it is necessary to prepare ornamental material - paper strips. For my stars, I tried several different stripes and as a result I was able to choose the optimal width - 1cm. If it is thinner, the work becomes more complicated, although the stars turn out to be very elegant, but the wide stripes make the star too clumsy.

Any paper can be used to make strips, except for cardboard, of course, as it is difficult to bend. But from wrapping satin paper, truly festive stars are obtained. If there is no such paper at hand, you can take sheets from magazines and even newspaper pages.

An important point: one-sided paper can be used, so the inside will be hidden from view.

Let's start making strips. After cutting a sheet 26 cm long into centimeter strips, we will make our work easier by gluing all the strips together, getting a kind of serpentine. I want to note that I had an idea to use real paper serpentine for making stars, but I had to postpone it, since the search for this material turned out to be problematic for me.

We make the basis of our crafts

It always seemed to me that the scheme for folding a paper pentagon is quite complicated. However, it was worth only once trying to fold the origami star, as the truth was revealed: folding the base of the future volumetric star is quite simple and it looks exactly like a regular pentagon.

First, you need to form a small loop from the workpiece, then, passing the end of the paper tape through it, tighten it to make a knot.

Important: the strips should be adjacent to each other without gaps, neither excessive looseness of the knot nor excessive tightening should be allowed.

Now we hide the tail of the tape, for this we will bend it back.

It was the turn of winding the notch.

Important: Tape must be wound tightly.

We just hid the tail of our loop. Now we bend the working part of the tape there as well. The base of our pentagonal star has already taken shape.

Winding an origami star

You need to try to tightly wrap around the sides of the pentagon, but so as not to crush its edges.

Turning the tape inside out, change its direction (up to the right) and now go around the other side of the pentagon. If the geometric figure is folded correctly, in the future the tape will itself lie in the direction you need. We direct the tape to the right.

It is desirable that all sides of the sprocket be rounded multiple times. For example, up to 30 cm can go to each asterisk. So wraps should be performed until the tape runs out.

Working on volume

When a piece of tape 1.5 cm long remains, we stop winding.

To hide the remaining end of the tape, you need to push it under the last turn.

This completes the preparation of the base of our asterisk, now the process of turning an ordinary regular pentagon into a three-dimensional star remains. Carefully picking up the craft, we stroke the sides of the star with our finger, in the direction from the edges to the middle. It is important to do this carefully, without squeezing the middle. Otherwise, the volume will not be achieved.

To make the asterisk beautiful, you need to make all sides identical. How the finished asterisk should look can be seen in the photo. There is also a side view. The diameter of the craft is 1.5 cm.

How can you use the craft we made?

You can just scatter them on the festive table; you can stick on greeting cards and decorate gifts with them; you can decorate the Christmas tree; you can string them on a thread with a relatively long needle and make a garland.

Having tried to make this beautiful star on your own, you will be surprised at yourself. So great will be the desire not to stop and prepare them for the future. For what? A question that makes you smile. The fact is that you can find a use for these original stars anywhere, you just need to turn on your imagination. I made a New Year's garland out of them with the children. True, I had to try a little to string each star with a needle onto a thread. Some people use these beautiful figurines for room decor: they pour a lot of such stars into a glass vase or bottle and bring a touch of cheerful mood to the atmosphere with such a bright design touch. There is another idea, to use stars in the design of a gift.

You can invent endlessly!

Treat yourself to a starfall for the New Year!

Is it New Year's Eve or a party with your girlfriends? One of the most striking decorations of the holiday can be paper stars. It is easy to make them voluminous, in 3D technique, or just small, very similar to the bright reflections of the moonlight.

A craft called a “do-it-yourself star” may be more like a Christmas tree decoration or resemble a garland.

Depending on what kind of accessory the craftswoman needs, one or another method of its manufacture will be chosen. Lots of techniques. Consider the main options.

But first we need

Paper. This is the main material from which stars are made. By the way, you can use cardboard, colored, shiny or velvet paper, newspapers and even used books.

In addition to the main tool, you will need: scissors, adhesive tape, glue, braid, various ropes, threads, a needle, beads for decoration.

Of the main techniques that are offered to craftswomen today, quilling, stained glass, stars in the form of garlands, 3D volumetric decorations, and modular products are held in high esteem.

Quilling technique

Let's make Christmas stars. You can use them as Christmas decorations. The essence of quilling is a special twisting of paper strips and gluing.

In the photo of the craft, the star looks very presentable. From this you can make a Christmas tree decoration or just fill the room with a festive mood before the party.

Each of the rays of this star consists of rolls of paper of the same color. A homemade star is no different from a standard production craft, and looks even better.

Don't stop at one product. At least 5-6 such decorations should be hung on the Christmas tree, sprinkled with artificial snow or covered with an interesting tone from a spray gun.

Quilling stars can be made not so angular and pointed. It is recommended to smoothly round the corners, but at the same time apply the same quilling principle.

The scheme is simple. You should cut 10 paper strips, build a triangle from each and divide into pairs. They need to be glued together as shown in the diagram.

At the end, make a hole for the thread with a hole punch or awl and hang this beauty on the Christmas tree.

Twisted triangle star

It is seven-pointed and very similar to a snowflake. We twist the paper into tubes and lay it on the base, previously flavored with glue. We follow the diagram.

You can string such stars on threads or make a garland with a sewing machine.

Doing it is simple. It is necessary to put a cardboard star under the sewing foot and sew in the middle, then allow empty lines and put the next blank. In the finale, you will be pleased with a noble garland.

A star that spans five continents

Make yourself a blank, presented below, using a printer by downloading the templates from the link. After printing them, bend the blanks in the places indicated in the diagram and glue the corresponding parts.

Volumetric design

The voluminous craft star is very eye-catching. Similar souvenirs can be used to decorate gathering places with friends, a festive lunch or dinner.

In addition, they should be hung in a bunch, paving the central lighting of the living room or decorating the window.

To create a voluminous craft, you will need: colored paper, a simple pencil, scissors, glue, a strong thread.

First you need to cut out a couple of sheets of paper in the shape of a square. They need to be formed as shown in the diagram.

After incising the blanks along the perpendicular line and bending, respectively. Next, grease each of the sides intended for gluing with glue and connect the star.

Convex Perfections

They are very small. They are made of thin paper and serve as a wonderful decoration for the interior, gifts, window decor and objects.

For manufacturing, you need colored paper, scissors and the hands of a craftswoman. Strips of paper must be cut correctly and this should be given close attention. The width of the strips should not exceed 9 mm, and their length - 22.1 cm.

After the strips are cut, you should make shapes in the form of eyelets. It is important to focus on the presented scheme.

After that, the remaining tail must be turned into a knot. This should be done as carefully as possible. An even pentagon turns into a strip. The tip is hidden inside the star.

New Year's

The Star of Bethlehem craft is made in many ways. Double-sided thick paper of any tones, glue and scissors will come in handy. There should be 4 types of squares. Total 8 pcs. Sizes: 7, 10, 13 and 18 cm.

After you need to fold the appropriate blank, as shown in the picture, and decorate the star with rhinestones and ribbons.

One hundred rays

This craft is very similar to a balloon, consisting of hundreds of small rays. Straight like a fan. The rays are strung on a thread alternately.

The ends of the star are connected and after the product can be hung from the ceiling or decorate the top of the Christmas tree with it.

Marine motifs

The starfish craft is quite simple to make. On thick cardboard, draw a five-pointed star and make small cuts along the edges. In total, for 2 crafts you will need to make 4 blanks.

Then you should bend along the contour lines and glue two stars each. The finish can be oil or watercolor paint of any tone.

photo diy star